Shandong Ourui

NEWS

Structural configuration of dangerous goods transport vehicles


Release time:

2025-06-06

The cargo box of a motor vehicle should have a wooden bottom plate to avoid sparks;

The cargo box of a motor vehicle should have a wooden bottom plate to avoid sparks; If an iron base plate is used, corresponding pads should be used for protection. Motor vehicle exhaust pipes must have insulation and spark extinguishing devices. Equip corresponding fire-fighting equipment, bundling, waterproofing, and anti loss devices according to the nature of the dangerous goods being loaded.
The material of the tank body of the tank truck must be suitable for the nature of the goods being loaded, for example, aluminum tanks should be used for nitric acid, and fiberglass and stainless steel should be used for waste nitric acid. Install safety devices such as double gates, wave barriers, and sunshades as needed. Vehicles transporting containers, large gas cylinders, and movable tanks must have effective and sturdy equipment and corresponding wooden plugs.
Special transport vehicles and equipment for transporting radioactive isotopes must comply with relevant regulations of the health and epidemic prevention department. Regularly inspect vehicles, equipment, handling tools, and protective equipment for radioactive contamination. When the radiation intensity exceeds the standard, they must be cleaned and disinfected before they can continue to be used.
The various loading and unloading machinery used requires a sufficient safety factor, and the general design requirement is to exceed one-third of the load capacity. For example, cranes and overhead cranes with a rated load of 5 tons should be able to achieve a lifting capacity of 6 to 7 tons. Shipping machinery must have explosion-proof devices to eliminate sparks. It is prohibited to use tools that are prone to friction and generate sparks, and the tools used must not have pollutants that are incompatible with the goods being loaded.